Order Products : sales@su-jiao.com
Lotrène® LLDPE Q2018N
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | QATOFIN Company Limited |
| Trademark: | Lotrène® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CRMCl7_Lotr-ne-LLDPE-Q2018N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lotrène® Q2018 Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer. They are designed for blown film applications and can be used in pure form as well as blended with other PE resins, such as LDPE or HDPE and mPE resins for mono extrusion or co-extrusion process to modify film properties. Lotrène® Q2018 Series are suited for many applications in the field of consumer, industrial, food or hygiene packaging such as freezer film, bread bags, shoppers and bags as well as lamination film and multilayer packaging film. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 40 µm, blown film | 215 | MPa | ASTM D882 |
| 1% secant, TD : 40 µm, blown film | 245 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 40 µm, blown film | 11.0 | MPa | ASTM D882 |
| TD : Yield, 40 µm, blown film | 11.0 | MPa | ASTM D882 |
| MD : Broken, 40 µm, blown film | 35.0 | MPa | ASTM D882 |
| TD : Broken, 40 µm, blown film | 32.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Broken, 40 µm, blown film | 850 | % | ASTM D882 |
| TD : Broken, 40 µm, blown film | 900 | % | ASTM D882 |
| Dart Drop Impact 1(40 µm, Blown Film) | 130 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 40 µm, blown film | 220 | g | ASTM D1922 |
| TD : 40 µm, blown film | 420 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525 |
| Peak Crystallization Temperature (DSC) | 121 | °C | Internal method |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 40.0 µm, Blown Film) | 55 | ASTM D2457 | |
| Haze (40.0 µm, Blown Film) | 14 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 - 210 | °C | |
| Cylinder Zone 2 Temp. | 170 - 210 | °C | |
| Cylinder Zone 3 Temp. | 170 - 210 | °C | |
| Cylinder Zone 4 Temp. | 170 - 210 | °C | |
| Cylinder Zone 5 Temp. | 170 - 210 | °C | |
| Melt Temperature | 190 | °C |
| Extrusion instructions |
|---|
| Blow-up ratio: 2:1 to 3:1Die gap: >1.8 mm |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (PC) XP 41 R 20 GF | A. Schulman Europe | PC | POLYMAN® |
| RTP 204F | RTP Company | Nylon 12 | RTP |
| Telcar® TL-1269B | Teknor Apex Company | TPE | Telcar® |
| AGILITY™ 6047 | The Dow Chemical Company | HDPE | AGILITY™ |
| Geon™ Specialty Suspension Impel S100 | Mexichem Specialty Resins, Inc. | PVC Homopolymer | Geon™ Specialty Suspension |
