Order Products : sales@su-jiao.com
STARFLEX® P 7054-1000
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | STAR Thermoplastic Alloys & Rubbers, Inc. |
| Trademark: | STARFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CR4Cgo_STARFLEX-P-7054-1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
STARFLEX® P 7054 Elastomer is an unfilled easy processing material designed for applications where FDA regulations are required. The material exhibits high resilience, low compression set, and good puncture resealing characteristics. It is also steam sterilizable. STARFLEX® P 7054 Elastomer is well suited for pharmaceutical closures, syringe bulbs, medical devices, and other applications where its combined rubber character, and thermoplastic nature can result in performance products at lower total cost. STARFLEX® P 7054 is supplied as ready to use translucent nibs of uniform size. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.5 to 2.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 54 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.41 | MPa | ASTM D412 |
| Tensile Strength (Break) | 4.48 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 193 to 204 | °C | |
| Front Temperature | 199 to 216 | °C | |
| Nozzle Temperature | 204 to 216 | °C | |
| Mold Temperature | 37.8 to 60.0 | °C | |
| Injection Pressure | 3.45 to 4.83 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.552 to 1.03 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide AG7 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| Wellamid® GF33-66/6 XE-BK167A | Wellman Engineering Resins | Nylon 66/6 | Wellamid® |
| HiFill® HDPE TM40 | Techmer Engineered Solutions | HDPE | HiFill® |
| POLYFORT® FPP 1005 | A. Schulman Inc. | PP, Unspecified | POLYFORT® |
| RTP 699 X 121801 | RTP Company | ABS | RTP |
