Order Products : sales@su-jiao.com
Monprene® MP-1426D XRD3 (PRELIMINARY DATA)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CMLYmY_MonpreneMP1426DXRD3PRELIMINARYDATA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Monprene®MP-1426D XRD3 (PRELIMINARY DATA) is a thermoplastic elastomer (TPE) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is extrusion or injection molding. Monprene®The main features of MP-1426D XRD3 (PRELIMINARY DATA) are: ROHS certification. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.978 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 0.50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 1 sec | 67 | ASTM D2240 | |
| Shaw A, 5 seconds | 63 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 5.86 | MPa | ASTM D412 |
| Tensile Strength (Break) | 9.31 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 800 | % | ASTM D412 |
| Legal statement |
|---|
| The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of theiraccuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products fortheir particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance withseller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patentowned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailedProduct Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical orfood contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may notbe available in one or more countries. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 193 - 227 | °C | |
| Middle Temperature | 199 - 232 | °C | |
| Front Temperature | 204 - 238 | °C | |
| Nozzle Temperature | 204 - 238 | °C | |
| Processing (Melt) Temp | 204 - 243 | °C | |
| Mold Temperature | 35 - 49 | °C | |
| Injection Pressure | 1.38 - 5.52 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.172 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| 无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 182 - 232 | °C | |
| Cylinder Zone 2 Temp. | 188 - 238 | °C | |
| Cylinder Zone 3 Temp. | 193 - 243 | °C | |
| Cylinder Zone 5 Temp. | 199 - 249 | °C | |
| Die Temperature | 199 - 249 | °C |
| Extrusion instructions |
|---|
| 螺杆转速30 - 100 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® HP 3500-G | Plastic Solutions, Inc. | PP Homopolymer | PrimaFlex® |
| Monprene® IN-15065 | Teknor Apex Company | TPE | Monprene® |
| TECHLEN M7151 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| TRIREX® 3025IR | Samyang Corporation | PC | TRIREX® |
| Karina BLACK PVC COMPOUND -E 650D48/ 1-C-IS | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
