Order Products : sales@su-jiao.com
Elastocon® 2855
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CKslVy_Elastocon2855.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® 2855 thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2855 is FDA compliant and well suited for consumer products and medical applications. Elastocon® 2855 can be overmolded onto polypropylene. Elastocon® 2855 is supplied as ready to use pellets in 50 lb. bag quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 3.00 | MPa | ASTM D412 |
| Tensile Strength | 4.70 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 410 | % | ASTM D412 |
| Tear Strength | 21.4 | kN/m | ASTM D624 |
| Compression Set (70°C, 22 hr) | 25 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 149 - 166 | °C | |
| Front Temperature | 166 - 182 | °C | |
| Nozzle Temperature | 188 - 216 | °C | |
| Mold Temperature | 21 - 38 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 - 1.38 | MPa | |
| Screw Compression Ratio | 2.5:1.0 - 3.0:1.0 |
| Injection instructions |
|---|
| Elastocon® 2855 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 79 | °C | |
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 5 Temp. | 177 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuchuan XCY-5035 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| ADDINYL B2 ZV30 | ADDIPLAST | Nylon 6 | ADDINYL |
| EPO-TEK® T905BN-3 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| MAXATEL® AC90LW-NAT | Pier One Polymers, Inc. | Acetal (POM) Copolymer | MAXATEL® |
| KMI PP KM-0275ZW | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
