Order Products : sales@su-jiao.com
EverGlide® 1908
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Polymer Dynamix |
| Trademark: | EverGlide® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CKBe8I_EverGlide-1908.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EverGlide™ 1908 is reactively modified nylon 6 resin designed for extrusion and injection molding applications. The EverGlide™ 1908 resin is highly lubricious and abrasion resistant and does not make use of additives or particulate modifiers which may be prone to being wiped off the surface, or pulled out of the resin. The unique chemistry and modification in the EverGlide™ 1908 allows for a material that has a surface that will self-heal in cases of extreme abrasion, marring or scratches. Features:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 51.0 | MPa | ASTM D638 |
| Fracture | 37.9 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 8.0 | % | ASTM D638 |
| Fracture | 40 - 50 | % | ASTM D638 |
| Flexural Modulus | 1520 | MPa | ASTM D790 |
| Flexural Strength | 56.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 64 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.12 | % | |
| Rear Temperature | 232 - 260 | °C | |
| Middle Temperature | 238 - 266 | °C | |
| Front Temperature | 243 - 271 | °C | |
| Nozzle Temperature | 249 - 277 | °C | |
| Processing (Melt) Temp | 249 - 277 | °C | |
| Mold Temperature | 65.6 - 93.3 | °C | |
| Injection Pressure | 34.5 - 138 | MPa | |
| Injection Rate | Moderate | ||
| Screw Speed | 40 - 70 | rpm | |
| Clamp Tonnage | 4.1 - 6.9 | kN/cm² |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 232 - 260 | °C | |
| Cylinder Zone 3 Temp. | 238 - 266 | °C | |
| Cylinder Zone 5 Temp. | 243 - 271 | °C | |
| Melt Temperature | 249 - 277 | °C | |
| Die Temperature | 249 - 277 | °C |
| Extrusion instructions |
|---|
| Suggested Max Moisture: .12% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Ject® 6100-10 | Premix, Inc. | TS, Unspecified | Premi-Ject® |
| Sarlink® TPV X5745B | Teknor Apex Company | TPV | Sarlink® TPV |
| Monprene® IN-22058 XRD (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
| Nylene® 4114-14 | Custom Resins Group | Nylon 66 | Nylene® |
| Huafon JF-HSY-9510 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
