Order Products : sales@su-jiao.com
Escor™ 5110
| Category: | EAA , Ethylene Acrylic Acid Copolymer Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Escor™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CIG8FF_Escor-5110.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Escor 5110 is mainly used for extrusion coating and extrusion compounding with high speed and low coating weight. It can be well bonded to polar substrates, aluminum foils, metal films, paper, steel and glass surfaces. It has extremely high binding resistance to acidic and aggressive food packaging. Very low heat sealing and heat sealing temperature, extremely high maximum thermal adhesive strength. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Acrylic Acid Content | 11.0 | wt% | ExxonMobil Method |
| Legal statement |
|---|
| 有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用 |
| Extrusion instructions |
|---|
| Excellent results are obtained in extrusion coating at 260°C - 280°C (500°F - 536°F) temperature range. Processing temperatures above 300°C (572°F) may cause resin degradation. To minimize corrosion risk, all exposed metal surfaces in the extruder and die should be made from corrosion resistant metals or nickel/chrome plated. ESCOR should be fed into the extruder after LDPE of a similar or higher melt index. Machines should always be completely purged with LDPE or a suitable cleaning compound before shutdown. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAXALAC™ 108GF17 | SAX Polymers | ABS | SAXALAC™ |
| Spartech Polycom SCR7-7010RF | Spartech Polycom | PC | Spartech |
| 4MID® 9A23500 X | 4Plas | Nylon 66 | 4MID® |
| Geon™ Vinyl Rigid Extrusion L7703 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| NILAMID® XS1 GF50 | Nilit Plastics | Nylon, Unspecified | NILAMID® |
