Order Products : sales@su-jiao.com
REPOL® B030MG
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | REPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CGcSne_REPOL-B030MG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Repol B030MG is recommended for use in Injection Moulding processes. It is an ideal material to use in crates, furniture, textile and automotive components where medium impact strength is required. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1050 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 95.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | Type I, 50 mm/min |
| 2 . | Type I, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytron® P20B03 | Polyram Ram-On Industries | PP, Unspecified | Polytron® |
| PrimaFlex® HP 1200 | Plastic Solutions, Inc. | PP Homopolymer | PrimaFlex® |
| RheTech Polypropylene RCC120-01 | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| AVALON® 98 AE | Huntsman Corporation | TPU-Polyester | AVALON® |
| INSULCAST® 125/INSULCURE 11B | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
