Order Products : sales@su-jiao.com
EVALENE® LLDPE LF08262
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | JG Summit Petrochemical Corporation |
| Trademark: | EVALENE® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CGGDwN_EVALENELLDPELF08262.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Stiff, strong and tough films are made using EVALENE ® LF08262, the most versatile EVALENE ® grade. EVALENE ® LF08262 has outstanding mechanical properties comparable with premium octene-based (C8) LLDPE, which makes it particularly suitable for very demanding heavy duty applications. EVALENE ® LF08262 can replace butene (C4) LLDPE with downgauging possibilities, and delivers maximum performance benefits as a core layer material in coextrusion. FEATURES
TYPICAL APPLICATIONS
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.80 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| secant modulus 2 | ASTM D882 | ||
| 1% secant, MD : 25 µm, blown film | 327 | MPa | ASTM D882 |
| 1% secant, TD : 25 µm, blown film | 262 | MPa | ASTM D882 |
| Tensile Strength 3 | ASTM D882 | ||
| MD : Yield, 25 µm, blown film | 14.0 | MPa | ASTM D882 |
| TD : Yield, 25 µm, blown film | 16.0 | MPa | ASTM D882 |
| MD : Broken, 25 µm, blown film | 13.0 | MPa | ASTM D882 |
| TD : Broken, 25 µm, blown film | 15.0 | MPa | ASTM D882 |
| Tensile Elongation 4 | ASTM D882 | ||
| MD : Yield, 25 µm, blown film | 16 | % | ASTM D882 |
| TD : Yield, 25 µm, blown film | 11 | % | ASTM D882 |
| MD : Broken, 25 µm, blown film | 490 | % | ASTM D882 |
| TD : Broken, 25 µm, blown film | 470 | % | ASTM D882 |
| Dart Drop Impact (25 µm, Blown Film) | 100 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm, blown film | 380 | g | ASTM D1922 |
| TD : 25 µm, blown film | 480 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.0 µm, Blown Film) | 72 | ASTM D2457 | |
| Haze (25.0 µm, Blown Film) | 15 | % | ASTM D1003 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Blow-up Ratio | 2.00 - 4.00 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 170 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 25 mm/min |
| 3 . | 500 mm/min |
| 4 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mediprene® 500750M | ELASTO | SEBS | Mediprene® |
| Resiten® 112 | ITEN INDUSTRIES | Phenolic | Resiten® |
| NYCOA Polyamide 2063 | Nycoa (Nylon Corporation of America) | Nylon 66/6 | NYCOA Polyamide |
| Epoxies, Ect. 20-1650 | Epoxies, Etc. | Silicone | Epoxies, Ect. |
| Alathon® L5645 | LyondellBasell Industries | HDPE | Alathon® |
