Order Products : sales@su-jiao.com
Comco PC
| Category: | PC , Polycarbonate |
| Manufacturer: | Comco-Plastic GmbH |
| Trademark: | Comco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CG9gLW_Comco-PC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Comco PC is a Polycarbonate (PC) material. It is available in Europe. Primary attribute of Comco PC: Flame Rated. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1183 |
| Water Absorption | |||
| Saturation, 23°C | 0.15 | % | |
| Equilibrium, 23°C, 50% RH | 0.35 | % | |
| Water Absorption | ISO 62 | ||
| after 24 h immersion in water : 23°C | 13.0 | mg | |
| after 96 h immersion in water : 23°C | 33.0 | mg |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Maximum Service Temperature | |||
| in air continuosly | 125 | °C | |
| in air for short periods | 135 | °C | |
| Service Temperature - Minimum | -60 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 75 | ISO 2039-2 | |
| Ball Indentation Hardness | 120 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2400 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 70.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | > 50 | % | ISO 527-2 |
| Tensile Creep Modulus 1(1000 hr) | 17.0 | MPa | ISO 899-1 |
| Compressive Stress | ISO 604 | ||
| 5% Strain | 72.0 | MPa | |
| 2% Strain | 35.0 | MPa | |
| 1% Strain | 18.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 9.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | ISO 179/1eU | |
| Notched Izod Impact Strength | 9.0 | kJ/m² | ISO 180/2A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 130 | °C | ISO 75-2/A |
| Melting Temperature | 150 | °C | |
| CLTE - Flow | |||
| 23 to 60°C | 6.5E-5 | cm/cm/°C | |
| 23 to 100°C | 6.5E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.21 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength | 28 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | ||
| 100 Hz | 3.00 | ||
| 1 MHz | 3.00 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz | 1.0E-3 | ||
| 1 MHz | 8.0E-3 | ||
| Comparative Tracking Index | 350 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | HB | ||
| 6.00 mm | HB | ||
| Oxygen Index | 25 | % | ISO 4589-2 |
| Note Message | |
|---|---|
| 1 . | 1% Strain |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® 80862-F | Teknor Apex Company | PVC, Flexible | APEX® |
| Clariant Nylon 6 PA-213XO12 | Clariant Corporation | Nylon 6 | Clariant Nylon 6 |
| ELASTOSIL® N 291 | Wacker Chemie AG | Silicone | ELASTOSIL® N |
| Iupiace® EHM103R | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| Akulon® Ultraflow K-FKG6 | DSM Engineering Plastics | Nylon 6 | Akulon® Ultraflow |
