Order Products : sales@su-jiao.com
K-vinyl KK-S-A-85
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Technovinyl Polymers India Ltd. |
| Trademark: | K-vinyl |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CFFVBZ_K-vinyl-KK-S-A-85.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
K-vinyl KK-S-A-85 is a Polyvinyl Chloride material. It is available in Africa & Middle East. Typical application of K-vinyl KK-S-A-85: Wire & Cable |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | < 4.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 16.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 230 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Cold Impact | No cracks | ||
| Heat Shock | No cracks | ||
| Thermal Stability (200°C) | 2 | hr |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ageing Test | ASTM S573 | ||
| in Hot Oven (E.B.) | 25.0 | ||
| in Hot Oven (T.S.) | 25.0 | ||
| Loss of Mass | 15.0 | g/m² | ASTM D573 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MBW2492 | Teknor Apex Asia Pacific PTE. LTD. | LDPE | Sinpolene |
| FLEXAREN® 14001 | Innospec Leuna GmbH | EVA | FLEXAREN® |
| Elastocon® CLR65 | Elastocon TPE Technologies | TPE | Elastocon® |
| Hifax CB252 | LyondellBasell Industries | TPO (POE) | Hifax |
| Hytrel® HTR8351 NC021 | DuPont Performance Polymers | TPC-ET | Hytrel® |
