Order Products : sales@su-jiao.com
CGPC PVC SO-30X (80 phr Plasticizer D)
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | China General Plastics Corporation |
| Trademark: | CGPC PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CFEZYr_CGPC-PVC-SO-30X-80-phr-Plasticizer-D-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CGPC PVC SO-30X (80 phr Plasticizer D) is a Flexible Polyvinyl Chloride material. It is available in Asia Pacific or North America for injection molding. Primary attribute of CGPC PVC SO-30X (80 phr Plasticizer D): Plasticized. Typical application of CGPC PVC SO-30X (80 phr Plasticizer D): Consumer Goods |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| -- | 10.8 | MPa | |
| 100% Strain | 5.88 | MPa | |
| Tensile Elongation (Break) | 150 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 44.1 | kN/m | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heating Volatility | 0.40 | % | ASTM D1203 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Romiloy® 5240 GF 30 | ROMIRA GmbH | PBT+ASA | Romiloy® |
| Bergamid™ PA66 C20 Black | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Braskem PP F008F | Braskem America Inc. | PP Homopolymer | Braskem PP |
| Hifax CA 1110 G4 LS/4 | LyondellBasell Industries | PP Copolymer | Hifax |
| IDI STC 2353 Woven | IDI Composites International | Polyester, TS | IDI STC |
