Order Products : sales@su-jiao.com
HANWHA CHNA-8380
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Hanwha Chemical |
| Trademark: | HANWHA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CEctxS_HANWHA-CHNA-8380.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Hanwha CHNA-8380 is a high molecular weight, high density polyethylene(HDPE) insulation compound especially designed for high-speed wire insulating extrusion process. It provides excellent processability, environmental and thermal stress cracking resistance. It meets major international aging test specification for both solid and foam/skin insulation. It can be used for the full range of telephone cable insulation including air-core, jelly-filled and LAN cable (Cat. 5/5e). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.945 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal, F0) | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 23.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 550 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oven Aging (100°C) | 2.0 | day | |
| Retention of Tensile Elongation - 2 days (100°C) | > 90 | % | ASTM D638 |
| Retention of Tensile Strength - 2 days (100°C) | > 90 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time - AI (200°C) | > 100 | min | ASTM D3895 |
| Thermal Stress Crack Resistance | > 96 | hr | ASTM D2951 |
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | < 2.30 | ASTM D150 | |
| Dissipation Factor (1 MHz) | < 1.0E-4 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 240 to 280 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® ForTii™ TX1 | DSM Engineering Plastics | Nylon 4T | Stanyl® ForTii™ |
| ALTECH® PA6 A 1000/126 UV | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Clariant Nylon 6/6 PA-133G13 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Hifax TSOP EM7 BLACK | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
| ESTOPLAST EP 2015BB01 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
