Order Products : sales@su-jiao.com

AFFINITY™ PT 1450G1

Category:	POP , Polyolefin Plastomer
Manufacturer:	The Dow Chemical Company
Trademark:	AFFINITY™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CDXZz5_AFFINITY-PT-1450G1.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Monolayer and coextrusion coating for packaging applications

Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant)

Coextruded with PRIMACOR* polymer as a cost effective foil or PET sealant

Complies with U.S. FDA

Consult the regulations for complete details. (See NOTES)

AFFINITY™ PT 1450G1 Polyolefin Plastomer is produced via INSITE™ Technology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to (OPP) and good taste and odor performance.

Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.

General Information
Agency Ratings	FDA not rated
Forms	Particle
Processing Method	Film extrusion Extrusion coating

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.902	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	7.5	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Seal Initiation Temperature ¹(25 µm)	82.8	°C	Internal method
Can be bonded to OPP ²			Internal method
316°C	0.13	kN/m	Internal method
288°C	0.18	kN/m	Internal method

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	77.2	°C	ASTM D1525
Melting Temperature (DSC)	97.8	°C	Internal method

Extrusion	Nominal Value	Unit	Test Method
Melt Temperature	288 - 316	°C
Neck-in (316°C, 25.4 µm)	134.6	mm	Internal method
Minimum coating thickness		µm	Internal method
Minimum coating weight		g/m²	Internal method

Extrusion instructions
挤出涂层薄膜的制造条件：挤塑机：Black Clawson 螺杆尺寸：3.5 英寸 (90 mm)；30:1 L/D 模具间隙：20 密尔 (0.508 mm) 冷却辊温度：57°F (14°C) 熔体温度：600°F (315°C) 输出：250 磅/小时气隙：6 英寸 (150 mm)

Note Message
1 .	1.0 Mill (25 µm) coating applied to 50 pounds of kraft paper. Achieve a temperature of 1 psig (4.4 N/25.4mm) heat seal strength. Heat seal strength, Topwave HT tester, 0.5 S holding pressure, 40 psi pressure, pulling speed 150 mm/s.
2 .	1.0 Mill (25 µm) coating applied to 50 pounds of kraft paper.

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom 1144-4-62	Spartech Polycom	PVC Alloy	Spartech
TROSIFOL® HR100	Kuraray Co., Ltd.	PVB	TROSIFOL®
WPP PP PPC1CF2-Black	Washington Penn Plastic Co. Inc.	PP Copolymer	WPP PP
Andur 7-3 APLF	Anderson Development Company	PUR-Ester/TDI	Andur
APEX® 80862	Teknor Apex Company	PVC, Semi-Rigid	APEX®