Order Products : sales@su-jiao.com
RELENE® LL24FA030
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CDMifg_RELENE-LL24FA030.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LL24FA030 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE). It is specially designed for low voltage insulation compound for silane cross-linking process. The grade is designed with optimum level of antioxidants. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.933 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 3.20 mm, Injection Molded | 15.0 | MPa | |
| Break, 3.20 mm, Injection Molded | 18.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield, 3.20 mm, Injection Molded | 17 | % | |
| Break, 3.20 mm, Injection Molded | > 600 | % | |
| Flexural Modulus (3.20 mm, Injection Molded) | 550 | MPa | ASTM D790 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toyolac庐 470Y-X68 | Toray Resin Company | ABS | Toyolac® |
| CALIBRE™ 303-22 | Trinseo | PC | CALIBRE™ |
| APEX® 69-8256-D | Teknor Apex Company | PVC, Flexible | APEX® |
| Plaslube® POM CO E TL20 | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
| Polyrocks 8200EP95V | Polyrocks Chemical Co., Ltd | TPE | Polyrocks |
