Order Products : sales@su-jiao.com
Shin-Etsu Elastomer KE-2004-10A/B
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Shin-Etsu Silicones of America |
| Trademark: | Shin-Etsu Elastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | CCEzMR_Shin-Etsu-Elastomer-KE-2004-10A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shin-Etsu Elastomer KE-2004-10A/B is a Silicone Rubber, HTV material,. This product is available in North America,. |
| General Information |
|---|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | 9 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.179 | MPa | |
| Tensile Strength | 2.80 | MPa | |
| Tensile Elongation (Break) | 580 | % | |
| Tear Strength 1 | 9.81 | kN/m | |
| Compression Set (180°C, 22 hr) | 2.3 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Post Cure Time (200°C) | 4.0 | hr |
| Additional Information |
|---|
| Press Cure / Post Cure: Press/Post |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time | 0.17 | hr |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® Rx1805 | Covestro - Polycarbonates | PC | Makrolon® |
| Propafilm™ FFX100 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| SABIC® Vestolen A 4062R y | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® Vestolen A |
| LEXAN™ HFD1413 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| PENTAMID A GV40 H schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
