Order Products : sales@su-jiao.com

NuSil MED-4942

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	CBcgc9_NuSil-MED-4942.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts. LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength. Comments: INJECTION MOLDING ELASTOMER, RESISTS BLOCKING

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.

LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.

Comments: INJECTION MOLDING ELASTOMER, RESISTS BLOCKING

General Information
Filler / Reinforcement	Silica
Features	Fast Cure Good Colorability High Strength
Uses	Gaskets Medical/Healthcare Applications Overmolding Seals Valves/Valve Parts
Agency Ratings	USP Class VI
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Mechanical	Nominal Value	Unit
Tensile Strength (200% Strain)	2.90	MPa

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Extrusion Rate	200	g/min

Uncured Properties	Nominal Value	Unit
Density	1.18	g/cm³
Curing Time (150°C)	0.17	hr
Pot Life (25°C)	> 1400	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	40
Tensile Strength	6.89	MPa
Tensile Elongation at Break	480	%
Tear Strength	43.8	kN/m

Resin Grade	Manufacturer	Category	Trademark
Karina IVORY PVC COMPOUND 800-35/ 1-AYR-AC-LF	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
MACOMASS PP MM-PP Reg	MACOMASS Verkaufs AG	PP, Unspecified	MACOMASS PP
Braskem PE SHC7260LSL	Braskem	HDPE	Braskem PE
NEONIT® SK60 L8F	SBHPP	Epoxy	NEONIT®
Sylvin 2977-65 Clear 8382	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin