Order Products : sales@su-jiao.com
TAFMER™ A-20090
| Category: | PAO , Polyalphaolefin |
| Manufacturer: | Mitsui Chemicals America, Inc. |
| Trademark: | TAFMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C8oHUV_TAFMER-A-20090.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TAFMER™A- 20090 is a polyα-olefin (PAO) material,. This product is available in North America,. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 60.0 | °C | ASTM D1525 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+18 | ohms·cm | ASTM D257 |
| Dielectric Strength | 55 | kV/mm | ASTM D149 |
| Dielectric Constant | 2.10 | ASTM D150 | |
| Dissipation Factor | 1.3E-4 | ASTM D150 |
| Additional Information |
|---|
| Tensile Strength @ Break, JIS K 6301: 160 kgf/cm²Elongation @ Break, JIS K 6301: 750%Surface Hardness, JIS K 6301, A Scale: 86 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PA66 A 2035/508 GF35 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| HANWHA CHNA-8380L | Hanwha Chemical | HDPE, HMW | HANWHA |
| HI-ZEX™ 2110JH | Prime Polymer Co., Ltd. | HDPE | HI-ZEX™ |
| Hostaform® C 52021 XAP | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Plaskon SMT-B-1N | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
