Order Products : sales@su-jiao.com
NYLOY® KF-0020N 6221W
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | Nytex Composites Co., Ltd. |
| Trademark: | NYLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C7WkGu_NYLOY-KF-0020N-6221W.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NYLOY® KF-0020N 6221W is a Polyamide material. It is available in Asia Pacific or North America. Primary attribute of NYLOY® KF-0020N 6221W: Flame Rated. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.65 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.95 | % | |
| Across Flow | 0.80 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 66.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.5 | % | ASTM D638 |
| Flexural Modulus | 6370 | MPa | ASTM D790 |
| Flexural Strength | 118 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 34 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 195 | °C | ASTM D648 |
| Thermal Conductivity | ASTM E1461 | ||
| -- 1 | 1.0 | W/m/K | |
| -- 2 | 3.5 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-2 | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Breakdown Voltage | > 5000 | V |
| Note Message | |
|---|---|
| 1 . | Through-plane |
| 2 . | In-plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Solprene® 411 | Dynasol Elastomers | SBS | Solprene® |
| NILFLEX® SH A40 MC009 | Taro Plast S.p.A. | SEBS | NILFLEX® |
| ALTECH® PA6 B 2030/500 GF30 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Escorene™ Ultra LD 705.MJ Molding | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| LNP™ THERMOCOMP™ UF006S compound | SABIC Innovative Plastics | PPA | LNP™ THERMOCOMP™ |
