Order Products : sales@su-jiao.com

Pinnacle PP 4150H

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	C5tXGT_Pinnacle-PP-4150H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

55 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING

Pinnacle Polymers Polypropylene 4150H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for thin-wall injection molding of housewares, industrial applications and consumer products requiring superior impact properties. Its high melt flow allows for quick filling of molds. Contains nucleator and antistat.

It is characterized not only by its easy mold flow, but also high impact at both room and sub-ambient conditions.

The 4150H product provides:

Ultra high impact

Superior balance of stiffness and impact strength

Very high melt flow

Fast cycle-time

Pinnacle's 4150H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

General Information
Additive	Antistatic Nucleating Agent
Features	Antistatic Fast Molding Cycle Food Contact Acceptable High Flow Impact Copolymer Low Temperature Impact Resistance Nucleated Ultra High Impact Resistance
Uses	Consumer Applications Household Goods Industrial Applications Thin-walled Parts
Agency Ratings	FDA 21 CFR 176.170 Table 1 & 2, Cond A-H FDA 21 CFR 177.1520(c) 3.1a FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	55	g/10 min	ASTM D1238
Molding Shrinkage - Flow	1.4	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	21.0	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	6.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1000	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	> 530	J/m	ASTM D256
Notched Izod Impact (Area) ⁵(23°C, 3.20 mm, Injection Molded)	52.0	kJ/m²	ASTM D256
Gardner Impact ⁶(-30°C)	30.0	J	ASTM D5420

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	96.0	°C	ASTM D648

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Type I
6 .	Method G, Geometry GC

Resin Grade	Manufacturer	Category	Trademark
MAXAMID™ PA66G43-BK10	Pier One Polymers, Inc.	Nylon 66	MAXAMID™
Wellamid® GB1430-N	Wellman Engineering Resins	Nylon 66	Wellamid®
GERMAFORM 9 GK 30	Kunststoff-Kontor-Hamburg GmbH	Acetal (POM) Copolymer	GERMAFORM
HAIPLEN EP80 Y2	Taro Plast S.p.A.	PP Copolymer	HAIPLEN
LUVOCOM® 19/CF/30	LEHVOSS Group	Nylon 46	LUVOCOM®