Order Products : sales@su-jiao.com
Adell PE KR-14
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | C4hCGa_Adell-PE-KR-14.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adell PE KR-14 is a High Density Polyethylene material filled with 20% glass fiber. It is available in North America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.40 to 0.70 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.010 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 60 | ||
| R-Scale | 80 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 51.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 3240 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 58.6 | MPa | ASTM D790 |
| Compressive Strength | 37.9 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 127 | °C | |
| 1.8 MPa, Unannealed | 116 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MonoSol® M2000 | MonoSol, LLC | PVOH | MonoSol® |
| BJB Polyurethane TC-818 A/B | BJB Enterprises, Inc. | PUR, Unspecified | BJB Polyurethane |
| Buna® EP G 6850 | LANXESS Corporation | EPDM | Buna® EP |
| HOPELEN J-150 | Lotte Chemical Corporation | PP Homopolymer | HOPELEN |
| Jampilen EPD60R | Jam Polypropylene Company | PP Copolymer | Jampilen |
