Order Products : sales@su-jiao.com

POTICON VT6

Category:	LCP , Liquid Crystal Polymer
Manufacturer:	Otsuka Chemical Co., Ltd.
Trademark:	POTICON
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BygUF6_POTICONVT6.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The Poticon series features a potassium titanate micro-filler compounded in thermoplastic resins to provide outstanding micro-reinforcement and dimensional stability. The excellent surface smoothness of these compounds limits friction toward opposing materials, reducing wear and allowing for greaseless applications. Moreover, as Poticon diminishes damage toward the mold and metal die and offers excellent recyclability, it also decreases processing costs.

Advantages

Microscopic reinforcement

Superior friction sliding and wear reduction

Excellent dimensional accuracy and surface smoothness

Highly recyclable

Applications

Automotive Parts (gears, bearings)

LED Reflectors

Watch Parts (gears, ground plane)

Camera (image stabilization parts)

Sliding Parts (gears, wheel bearing)

Camera Module Parts

Motor Parts (cog-wheels, bearings)

VT6 Property: High strength, High rigidity, High flowability

General Information
Features	High Dimensional Stability Low friction coefficient Rigidity, high High strength Recyclable materials High liquidity
Uses	LEDs Gear Application in Automobile Field Camera application Bearing
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.69	g/cm³	ASTM D792
Molding Shrinkage
Flow	0.10	%
Transverse flow	0.50	%
Water Absorption (Equilibrium)	0.080	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	75		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	235	MPa	ASTM D638
Tensile Elongation (Break)	6.3	%	ASTM D638
Flexural Modulus	13700	MPa	ASTM D790
Flexural Strength	212	MPa	ASTM D790
Coefficient of Friction (vs. Steel - Dynamic)	0.37
Abrasion Loss
-- ¹	14.3	10^-3 mm³/N·km
of counterpart ²	0.00	10^-3 mm³/N·km

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	235	°C	ASTM D648

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	250	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	1.3E-5	cm/cm/°C	ASTM D696

Injection	Nominal Value	Unit
Processing (Melt) Temp	280 - 320	°C
Mold Temperature	80 - 120	°C
Injection Pressure	50.0 - 60.0	MPa

Note Message
1 .	Surface pressure: 1MPa
2 .	Slipping velocity: 0.3m/sec

Resin Grade	Manufacturer	Category	Trademark
RTP 384 HEC	RTP Company	PC	RTP
ADMER™ NF588A	Mitsui Chemicals America, Inc.	PE, Unspecified	ADMER™
Boda BDF-H2601	Chenguang Fluoro & Silicone Elastomers Co., Ltd.	Fluorelastomer	Boda
KOPLA PP KPT1020	KOPLA Co., Ltd.	PP, Unspecified	KOPLA PP
OTECH ALLOY OTO9150LSZH - Riser Insulation	OTECH Corporation	TP, Unspecified	OTECH ALLOY