Order Products : sales@su-jiao.com
FRAGOM PR/6 AMR
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BxwqgR_FRAGOM-PR-6-AMR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM: is the trade-mark of our flame retardant halogen free polyolefine thermoplastic compounds FRAGOM PR/6 AMR: flame retardant polyolefine thermoplastic compound having high temperature index and very good oxygen index. Suitable for cable sheathing and insulation. Certify: M1 CEI 2022 II |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 8.0 | g/10 min | ASTM D1238 |
| Water Absorption - 24 hr (100°C) | 6.00 | mg/cm² | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - 4h at 80°C -Penetratrion | 20 | % | IEC 60811 |
| Temperature Index 1 | 380 | °C | NES 715 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Constant (20°C) | > 500 | Mohms·km |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | < 1 | % | IEC 60754-1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 185 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 54 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 12.5 | MPa | IEC 60811 |
| Tensile Strain (Break) | 180 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 21 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (100°C, 168 hr) | -22 | % | IEC 60811 |
| Change in Tensile Stress | |||
| 4 hr, in Gasoline | -18 | % | ENI 018 100 |
| 70°C, 4 hr, in SAE 20 Oil | -17 | % | IEC 60811 |
| Change in Tensile Strain at Break | |||
| 4 hr, in Gasoline | 5.0 | % | ENI 018 100 |
| 70°C, 4 hr, in SAE 20 Oil | 0.0 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 40 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 125 | °C | |
| Cylinder Zone 2 Temp. | 145 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Die Temperature | 190 | °C |
| Note Message | |
|---|---|
| 1 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2650 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| RTP 299 X 117593 C | RTP Company | Nylon 66 | RTP |
| Selvol™ 513 | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| CP PRYME® Nylon 66 NN133TL | Chase Plastics Services Inc. | Nylon 66 | CP PRYME® Nylon 66 |
| Elastron® V V601.A95.B | Elastron USA, Inc. | TPV | Elastron® V |
