Order Products : sales@su-jiao.com

BITONER® BT-2110

Category:	TP, Unspecified , Thermoplastic
Manufacturer:	Qingdao Bater Chemical Co., Ltd.
Trademark:	BITONER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BrP46M_BITONER-BT-2110.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
BITONER BT-2110 is thermoplastic, low molecular weight, slightly yellow aliphatic resin obtained from petroleum-derived monomers.Characterized by low softening point,narrow MWD,low wax cloud point, good compatibility with NR,SIS and other polymers,this grade is mainly used in rubber based PSA. Characteristics: Excellent compatibility with SIS,and other polymers Good thermal stability Low Molecular Weight and Narrow MWD Low Wax Cloud Point Low volatility and low odor Water resistance Applications: HMPSA Solvent based PSA Hot Melt Adhesive Sealants

Message

BITONER BT-2110 is thermoplastic, low molecular weight, slightly yellow aliphatic resin obtained from petroleum-derived monomers.Characterized by low softening point,narrow MWD,low wax cloud point, good compatibility with NR,SIS and other polymers,this grade is mainly used in rubber based PSA.

Characteristics:

Excellent compatibility with SIS,and other polymers

Good thermal stability

Low Molecular Weight and Narrow MWD

Low Wax Cloud Point

Low volatility and low odor

Water resistance

Applications:

HMPSA

Solvent based PSA

Hot Melt Adhesive

Sealants

General Information
Features	Aliphatic Good Thermal Stability Low Molecular Weight Low to No Odor Low to No Water Absorption Narrow Molecular Weight Distribution
Uses	Adhesives Sealants Seals
Appearance	Yellow

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.918 to 0.988	g/cm³	Internal Method
Acid Value	< 0.30	Mg KOH/g	ASTM D974
Color - 50% resin solid in Toluene	Max4#		ASTM D1544

Thermal	Nominal Value	Unit	Test Method
Softening Point ¹	91 to 97	°C	ASTM E28

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (175°C)	< 500	mPa·s	ASTM D3236

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature ²	49.0	°C

Note Message
1 .	Ring & Ball
2 .	midpoint

Resin Grade	Manufacturer	Category	Trademark
ACLAM® TC100 (6 mil)	Honeywell	Polyolefin, Unspecified	ACLAM®
Arlon® AD250	Arlon-MED	PTFE	Arlon®
KOCETAL® GB306	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®
Loyblend® TA-1100	Colour Image Plastic Compound Sdn. Bhd. (CIPC)	PC+ABS	Loyblend®
Lupox® GP1000H	LG Chem Ltd.	PBT	Lupox®