Order Products : sales@su-jiao.com
Osterlene® PPC-57-1.4-N
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Br4FIu_Osterlene-PPC-57-1-4-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PPC-57-1.4-N is a polypropylene impact copolymer formulated for injection molding applications that require a balance of fast fill, impact strength and stiffness. It offers the benefits of gas-phase technology along with a balance of stiffness, impact strength and gloss. PPC-57-1.4-N contains a mold release and nucleating agents and exhibits excellent organoleptics. PPC-57-1.4-N meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 57 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 89 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 4.8 | % | ASTM D638 |
| Flexural Modulus | 1240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 75 | J/m | ASTM D256 |
| Unnotched Izod Impact (-18°C) | 960 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 98.9 | °C | ASTM D648 |
| Additional Information |
|---|
| The value listed as Unnotched Izod Impact, ASTM D256, was tested accordance with ASTM 4812. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 221 | °C | |
| Middle Temperature | 232 | °C | |
| Front Temperature | 243 | °C | |
| Nozzle Temperature | 243 | °C | |
| Mold Temperature | 210 - 227 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9718-70 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Axpoly® PS01 3039 | Axion Polymers | PS (HIPS) | Axpoly® |
| DURACON® SF-15LV | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | DURACON® |
| Geon™ Vinyl Rigid Molding M3400 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
| Lumid® LW4403B(W) | LG Chem Ltd. | Nylon 66+ABS | Lumid® |
