Order Products : sales@su-jiao.com
Maxxam™ SY 89-21-1
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Maxxam™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BpduU8_Maxxam-SY-89-21-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Special polyolefin is an expandable polypropylene composite material. The usual expansion is 60%. It is used for production data and voice communication lines. The foaming agent in the polypropylene copolymer is pre-existing, low density and suitable for thin wall insulation Excellent insulation characteristics, stable cellular structure under wall thickness as low as 10 mils, and the finished wire has stable electrical characteristics and good mechanical characteristics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.579 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(190°C/2.16 kg) | 2.1 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 23.4 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 400 | % | ASTM D638 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 kHz) | 2.24 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 3.0E-4 | ASTM D150 |
| Additional Information |
|---|
| 注释：1. 模制厚板（0.075"）的典型属性；不能视为技术规格。2. 泡沫密度减少取决于装载等级、温度以及冷却之前的停留时间。3. 推荐的加工温度： 190°C 到220°C（375°F 到430°F）。 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Type 4, 510mm/min |
| 3 . | Type 4, 510mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SMOKEGUARD™ III 1057 NATURAL | AlphaGary | PVC, Semi-Rigid | SMOKEGUARD™ III |
| AvaSpire® AV-848 GF30 | Solvay Specialty Polymers | PAEK | AvaSpire® |
| ELASTOSIL® LR 3844/40 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| EPIGUM EXP/5065 | Crosspolimeri S.p.A. | TPE | EPIGUM |
| Durethan® AKV 35 000000 | LANXESS GmbH | Nylon 66 | Durethan® |
