| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Vi-Chem Corporation |
| Trademark: | Sevrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Bnd0H9_Sevrene-3085-70A.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
Sevrene® 3085-70A is a Thermoplastic Elastomer (TPE) material. It is available in North America. Typical application of Sevrene® 3085-70A: Automotive |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 68 | ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | > 2.10 | MPa | ISO 37 |
| Tensile Stress (Yield) | > 7.70 | MPa | ISO 37 |
| Tensile Elongation (Break) | > 910 | % | ISO 37 |
| Tear Strength | > 30 | kN/m | ISO 34-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (80°C, 1000 hr) | 4.0 | % | ASTM D412 |
| Change in Ultimate Elongation in Air (80°C, 1000 hr) | 30 | % | ASTM D412 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate 1 | 53 | mm/min | Multiple Standards |
| Fogging 2 | |||
| -- | > 82 | % | |
| 95°C | > 82 | % |
| Note Message | |
|---|---|
| 1 . | ISO 3795/ FMVSS 302 |
| 2 . | SAEJ 1756, 6 hrs, (16 hr reading) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 TFE 10 SI 2 | RTP Company | Nylon 66 | RTP |
| PVC Film 569 | Teknor Apex Company | PVC, Flexible | PVC Film |
| AKROMID® T1 GF 50 black (3101) | AKRO-PLASTIC GmbH | PPA | AKROMID® |
| Ketron® PEEK 30% GF (EXTRUSION) | Quadrant Engineering Plastic Products | PEEK | Ketron® |
| Sylvin 9077-85C BLACK | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |