Order Products : sales@su-jiao.com
Alkadyne™ HDF145B
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Alkadyne™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BmvLhV_Alkadyne-HDF145B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Alkadyne™ HDF145B is a black high molecular weight bimodal PE100 High Density Polyethylene. It is a high performance resin for use in pressure pipes where servic life to 100 years is required. Alkadyne HDF145B offers a balance of excellent processing characteristics along with outstanding toughness, chemical resistance and slow crack growth resistance. Alkadyne HDF145B will also provide excellent resistance to the effects of ultra-violet light exposure in outdoor applications due to well dispersed carbon black. Alkadyne™ HDF145B is suitable for extrusion into a full range of pipes, where High Density, PE100 type resins are required. In particular, a broad processing window and excellent sag resistance enables the extrusion of larger bore, very thick wall pipe. Alkadyne HDF145B is suitable for use in the transport of a wide range of fluids for industrial, rural and mining applications, including potable water. Suitability for use in any application should be determined by appropriate performance testing. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.961 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/21.6 kg | 6.6 | g/10 min | |
| 190°C/5.0 kg | 0.17 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(1.90 mm) | 1300 | MPa | ASTM D638 |
| Tensile Strength 2 | ASTM D638 | ||
| Yield, 1.90 mm | 25.0 | MPa | |
| Break, 1.90 mm | 37.0 | MPa | |
| Tensile Elongation 3(Break, 1.90 mm) | 760 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4 | 1120 | MPa | ASTM D790 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| 3 . | Type IV, 50 mm/min |
| 4 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-2450F | Teknor Apex Company | TPE | Telcar® |
| Bergadur™ BR3300-8024 RS NC018 | PolyOne Corporation | PBT | Bergadur™ |
| BUP 690 | Bonyan Kala Chemie Company | Polyester, TS | BUP |
| FRIANYL® A3 GF35 V0P1 | Nilit Plastics | Nylon 66 | FRIANYL® |
| EPO-TEK® E2036 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
