Order Products : sales@su-jiao.com
CLARIX® 111702-01 Clear
| Category: | Ionomer , Ionomer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | CLARIX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BmV5CG_CLARIX-111702-01-Clear.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Ionomer Sodium |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.970 | g/cm³ | ASTM D792A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec, 23°C) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield, 23°C | 19.5 | MPa | |
| Break, 23°C | 33.0 | MPa | |
| Tensile Elongation 2(Break, 23°C) | 300 | % | ASTM D638 |
| Flexural Modulus 3(23°C, 50.0 mm Span) | 530 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 51.0 | °C | ASTM D1525 4 |
| Note Message | |
|---|---|
| 1 . | Type I, 50 mm/min |
| 2 . | Type I, 50 mm/min |
| 3 . | Method I (3 point load), Type I, 1.3 mm/min |
| 4 . | Rate B (120°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE ICP5505 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| SILPURAN® 8030/50 | Wacker Chemie AG | Silicone | SILPURAN® |
| Moplen HP748H | HMC Polymers | PP Homopolymer | Moplen |
| Ultramid® B36 | BASF Corporation | Nylon 6 | Ultramid® |
| Petrothene® NA594081 | LyondellBasell Industries | LDPE | Petrothene® |
