Order Products : sales@su-jiao.com
Celstran® TPU-GF40-01
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Celanese Corporation |
| Trademark: | Celstran® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BmI4wo_Celstran-TPU-GF40-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 40% long strand glass fiber reinforced thermoplastic polyurethane |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.52 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.050 - 0.10 | % | ASTM D955 |
| Transverse flow | 0.10 - 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| 23°C | 12100 | MPa | ASTM D638 |
| -- | 11100 | MPa | ISO 527-2/1A/1 |
| Tensile Strength | |||
| Fracture, 23°C | 233 | MPa | ASTM D638 |
| Fracture | 210 | MPa | ISO 527-2/1A/5 |
| Tensile Elongation | |||
| Fracture, 23°C | 2.6 | % | ASTM D638 |
| Fracture | 2.5 | % | ISO 527-2/1A/5 |
| Flexural Modulus (23°C) | 10100 | MPa | ISO 178 |
| Flexural Stress (23°C) | 315 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 48 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, not annealed | 90.6 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 90.0 | °C | ISO 75-2/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Hopper Temperature | 70.0 - 80.0 | °C | |
| Rear Temperature | 240 - 250 | °C | |
| Middle Temperature | 245 - 255 | °C | |
| Front Temperature | 245 - 260 | °C | |
| Nozzle Temperature | 245 - 260 | °C | |
| Processing (Melt) Temp | 245 - 260 | °C | |
| Mold Temperature | 70.0 - 90.0 | °C |
| Injection instructions |
|---|
| Manifold Temperature: 250 to 260°CZone 4 Temperature: 245 to 260°CFeed Temperature: 20 to 50°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 700 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| NEFTEKHIM PS 590 | Nizhnekamskneftekhim Inc. | PS (GPPS) | NEFTEKHIM PS |
| INFUSE™ 9807 | The Dow Chemical Company | OBC | INFUSE™ |
| Jamplast Ex-01 PC | Jamplast, Inc. | PC | Jamplast |
| Plaslube® PEEK CF30 1011 A | Techmer Engineered Solutions | PEEK | Plaslube® |
