Order Products : sales@su-jiao.com
ISOTHANE® 8101-B
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Great Eastern Resins Industrial Co Ltd (GRECO) |
| Trademark: | ISOTHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BldWh2_ISOTHANE-8101-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ISOTHANE 8101-B product is a clear engineering thermoplastic polyurethane resin. It exhibits excellent bio-compatibility, hydrolytic resistance, fungus resistance, tensile and flexural strength, toughness, solvent resistance, abrasive resistance, good fatigue resistance, and maintenance of good physical properties under UV exposure. The product can be injection molded and extruded. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (224°C/5.0 kg) | 22 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2090 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 65.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 130 | % | ASTM D638 |
| Flexural Modulus | 2260 | MPa | ASTM D790 |
| Flexural Strength | 75.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(23°C) | 780 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 85.0 | °C | |
| Suggested Max Moisture | < 0.020 | % | |
| Rear Temperature | 205 | °C | |
| Middle Temperature | 220 | °C | |
| Front Temperature | 220 | °C | |
| Nozzle Temperature | 230 | °C | |
| Processing (Melt) Temp | 220 - 240 | °C | |
| Mold Temperature | 65.0 - 80.0 | °C |
| Injection instructions |
|---|
| Use low compression screw with L/D of 20 or more.Keep compression ratio to be between 2:1 and 2.5:1. |
| Note Message | |
|---|---|
| 1 . | 3.2mm notch depth |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL ABS-GP-IM | Polymer Resources Ltd. | ABS | PRL |
| REPOL® AM120N | Reliance Industries Limited | PP Homopolymer | REPOL® |
| Fainplast PVC GS 75/R1 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| E-Pos 941 | Epocat Nederland BV | Epoxy | E-Pos |
| Hifax TYC 852X | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
