Order Products : sales@su-jiao.com
GERMAFORM MF20-6624
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Kunststoff-Kontor-Hamburg GmbH |
| Trademark: | GERMAFORM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Bgv6gx_GERMAFORM-MF20-6624.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GERMAFORM MF20-6624 is an Acetal (POM) Copolymer material. It is available in Europe. Primary attribute of GERMAFORM MF20-6624: Flame Rated. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.58 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (190°C/2.16 kg) | 5.50 | cm³/10min | ISO 1133 |
| Molding Shrinkage | 0.60 to 1.0 | % | ISO 294-4 |
| Water Absorption (Saturation, 23°C) | 0.10 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4600 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 70.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 5.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 4.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 58 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 140 | °C | ISO 75-2/A |
| Melting Temperature | 166 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FC 39 F | Versalis S.p.A. | LDPE | Riblene® |
| RTP 2800 B-45A FR A | RTP Company | TPV | RTP |
| Nylene® 311-G13 HS | Custom Resins Group | Nylon 66 | Nylene® |
| ALCOM® PC 740/4 UV GY1408-07LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Plenco 06401 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
