Order Products : sales@su-jiao.com
CERTENE™ HI-762
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BgPc5I_CERTENE-HI-762.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HI-762 is a certified prime grade designed for INJECTION MOLDING of industrial container applications requiring superior Toughness and high Stiffness. HI-762 features very narrow molecular weight distribution, good process ability, Impact strength, excellent dimensional stability with low Warpage. HI-762 suggested applications include pails and crates, fruit and vegetable trays, sport articles, cases, and tote bins. HI-762 processing temperature is 220 to 250°C. with mold @ 20 to 40°C. HI-762 complies with FDA regulation 21CFR 177.1520 (c) 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.962 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 67 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 30.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 1500 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Compression Molded) | 1300 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 54 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 129 | °C | ASTM D1525 |
| Additional Information |
|---|
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 - 250 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 MG 30 | RTP Company | Nylon 66 | RTP |
| Sinvicomp SRF2703 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| Moplen HP520J | LyondellBasell Industries | PP Homopolymer | Moplen |
| DENKA Transparent Polymer TE-20S | Denka Company Limited | ABS | DENKA Transparent Polymer |
| ALCOM® AWL 109/10 GF20 WT1142-12LB | ALBIS PLASTIC GmbH | PC+ABS | ALCOM® AWL |
