Order Products : sales@su-jiao.com

Ingeo™ 6362D

Category:	PLA , Polylactic Acid
Manufacturer:	NatureWorks® LLC
Trademark:	Ingeo™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Bg27v3_Ingeo6362D.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Ingeo biopolymer 6362D, a NatureWorks LLC product, is a thermoplastic fiber-grade resin derived from annually renewable resources. Available in pellet form, 6362D is a higher melt flow resin designed for specialty fiber products where an amorphous structure is desired. Ingeo biopolymer 6362D can be converted into a broad range of fiber products.

Potential applications for Ingeo biopolymer 6362D include:

Low melt binder fibers/sheath

Low melt coatings

Dissolvable / sacrificial fiber components

General Information
Features	Comstable Updatable resources High liquidity Compliance of Food Exposure
Uses	Fiber
Agency Ratings	FDA Food Exposure, Not Rated Europe 10/1/2011 12:00:00 AM
Forms	Particle
Processing Method	Fiber (spinning) extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.24	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (210°C/2.16 kg)	70 - 85	g/10 min	ASTM D1238
Relative Viscosity (30°C)	2.50

Additional Information	Nominal Value	Unit
Denier per Filament ¹	1.00 - 2.00	dpf
Fabric Weight	Various

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	55.0 - 60.0	°C	ASTM D3417
Peak Crystallization Temperature (DSC)	125 - 135	°C	ASTM D3418

Fill Analysis	Nominal Value	Unit
Melt Density (230°C)	1.08	g/cm³

Extrusion	Nominal Value	Unit
Drying Temperature	40	°C
Drying Time	8.0 - 12	hr

Note Message
1 .	g/9000m

Resin Grade	Manufacturer	Category	Trademark
RTP 200 TFE 15 SI 2	RTP Company	Nylon 66	RTP
RTP PP 20 TALC	RTP Company	PP, Unspecified	RTP
Tenac™-C ZLD75	Asahi Kasei Chemicals Corporation	Acetal (POM) Copolymer	Tenac™-C
Toraypef® 15020 AP17	Toray Resin Company	Polyolefin, Unspecified	Toraypef®
GPPC ABS D-470	GPPC Chemical Co., Ltd.	ABS	GPPC ABS