Algoflon® G10

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	Solvay Specialty Polymers
Trademark:	Algoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Bb4w6B_AlgoflonG10.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Algoflon® G10 is a polytetrafluoroethylene (PTFE) virgin resin. This product has been developed as a PTFE resin for use in ASTM D4894-15, Type 1 applications. Algoflon® G10 is recommended for use in pyrotechnic applications.

General Information
Features	Good chemical resistance
Uses	Mixing Additive
Appearance	White
Forms	Powder
Processing Method	Compression molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.13 - 2.18		ASTM D4894
Average Particle Size	550	µm	ASTM D4894
Volume density	500	g/l	ASTM D4894

Mechanical	Nominal Value	Unit	Test Method
Elongation at break- minimum	150	%	ASTM D4894
Tensile strength- minimum	13.9	MPa	ASTM D4894

Additional Information
Algoflon® G10 is classified as Type I Grade 1 resin in ASTM 04894, with the exception of Bulk Density.NOTE: The data listed above fall with in the normal range of product properties, but they should not be used to establish specification limits nor be used alone as the basis of design.SAFETY & HANDLINGAlgoflon® G10 should be handled like other Algoflon® PTFE resins. When PTFE resins are heated to temperatures above 420°C, minor amounts of decomposition products, which may be harmful, are given off. Avoid inhalation of these fumes. Ovens and process equipment should be vented and adequate ventilation provided in the working area.For further information refer to the Algoflon® PTFE Material Safety Data Sheet.

Additional Information

Algoflon® G10 is classified as Type I Grade 1 resin in ASTM 04894, with the exception of Bulk Density.NOTE: The data listed above fall with in the normal range of product properties, but they should not be used to establish specification limits nor be used alone as the basis of design.SAFETY & HANDLINGAlgoflon® G10 should be handled like other Algoflon® PTFE resins. When PTFE resins are heated to temperatures above 420°C, minor amounts of decomposition products, which may be harmful, are given off. Avoid inhalation of these fumes. Ovens and process equipment should be vented and adequate ventilation provided in the working area.For further information refer to the Algoflon® PTFE Material Safety Data Sheet.

Resin Grade	Manufacturer	Category	Trademark
Sylvin 2946-80 Clear 8392	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
DIGITALWAX® DC 300	DWS Systems	Unspecified	DIGITALWAX®
Iupiace® GN30	Mitsubishi Engineering-Plastics Corp	PPE+PS	Iupiace®
SCHULABLEND® (ABS/PC) M/MB 4302 PG	A. Schulman Europe	PC+ABS	SCHULABLEND®
neogol® 60 P UG	API SpA	TPO (POE)	neogol®