Order Products : sales@su-jiao.com
Sumikon® PM-9630 (Type: J Black)
| Category: | Phenolic , Phenolic |
| Manufacturer: | SBHPP |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BWUtx3_SumikonPM9630TypeJBlack.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SUMIKON® PM-9630 (Type J Black) is Glass fiber and Inorganic filler filled resol resin (non-anmonia phenolic) molding compound with good mechanical property and heat resistance. This grade is official registered UL with V-0 (t=0.16). |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.81 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow | 0.26 | % | JIS K6911 |
| Water Absorption (Equilibrium) | 0.13 | % | JIS K6911 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 113 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 120 | MPa | JIS K6911 |
| Flexural Modulus | 16000 | MPa | JIS K6911 |
| Flexural Strength | 200 | MPa | JIS K6911 |
| Compressive Strength | 229 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 243 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 10 | kV/mm | JIS K6911 |
| Arc Resistance | 181 | sec | JIS K6911 |
| Comparative Tracking Index | 175 | V | IEC 60112 |
| Insulation Resistance | JIS K6911 | ||
| -- 2 | 9.0E+12 | ohms | JIS K6911 |
| -- 3 | 3.0E+12 | ohms | JIS K6911 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.160 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Method B (step by step) |
| 2 . | As molded |
| 3 . | After boiling |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GF 30 FRA 3 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Generic Nylon 66+Nylon 6I/6T | Generic | Nylon 66+Nylon 6I/6T | Generic |
| Hangzhou Jinxin VMCPP Film | Hangzhou Jinxin Filming Packaging Co., Ltd. | Film, PP | Hangzhou Jinxin |
| POLYCOMPO PE 4570 | POLYCOMPO Co.,Ltd. | LLDPE | POLYCOMPO PE |
| POLYCOMPO PP F102W | POLYCOMPO Co.,Ltd. | PP, Unspecified | POLYCOMPO PP |
