Order Products : sales@su-jiao.com
Cosmic DAP K61/6230
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BVP3Vb_Cosmic-DAP-K61-6230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic K61 / 6230 is a long glass fiber filled, general purpose diallyl iso-phthalate molding compound which is supplied in a flake form. It can be preformed and molds easily in standard compression or transfer equipment. FEATURES It has excellent mechanical and electrical properties with a high dielectric strength and low dielectric constant. It has superior heat resistance and excellent machining qualities. K61 / 6230 has a shelf life of two years at room temperature with no reduction in performance. APPLICATIONS The high strength of this material makes it ideal for switches, terminals, housings, structural parts and insulators. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.72 | g/cm³ | |
| Bulk Factor | 6.0 | ||
| Molding Shrinkage - Flow | 0.10 to 0.40 | % | |
| Dimensional Stability | < 0.010 | % | |
| Water Absorption 1(Equilibrium, 50°C) | 0.25 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 41.4 to 68.9 | MPa | |
| Flexural Strength | 89.6 to 117 | MPa | |
| Compressive Strength | 165 to 207 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 160 to 320 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow (-40 to 100°C) | 2.4E-5 | cm/cm/°C | |
| Heat Distortion | 260 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Dielectric Breakdown | |||
| Dry | 64000 | V | |
| Wet | 60000 | V | |
| Surface Resistivity | |||
| -- 2 | 5.0E+10 | ohms | |
| -- 3 | > 1.0E+16 | ohms | |
| Volume Resistivity | |||
| -- 4 | 3.0E+10 | ohms·cm | |
| -- 5 | > 1.0E+16 | ohms·cm | |
| Dielectric Strength 6 | |||
| Dry | 16 | kV/mm | |
| Wet | 16 | kV/mm | |
| Dielectric Constant | |||
| 1 kHz 7 | 4.10 | ||
| 1 kHz 8 | 4.00 | ||
| 1 MHz 9 | 3.90 | ||
| 1 MHz 10 | 3.80 | ||
| Dissipation Factor | |||
| 1 kHz 11 | 9.0E-3 | ||
| 1 kHz 12 | 8.0E-3 | ||
| 1 MHz 13 | 0.013 | ||
| 1 MHz 14 | 0.012 | ||
| Arc Resistance | 180 | sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 135 to 170 | °C | |
| Injection Pressure | 3.45 to 55.2 | MPa |
| Note Message | |
|---|---|
| 1 . | 48 hrs |
| 2 . | 30 days @ 100% RH @ 70°C |
| 3 . | As Is |
| 4 . | 30 days @ 100% RH @ 70°C |
| 5 . | As Is |
| 6 . | Method B (Step-by-Step) |
| 7 . | Wet |
| 8 . | Dry |
| 9 . | Wet |
| 10 . | Dry |
| 11 . | Wet |
| 12 . | Dry |
| 13 . | Wet |
| 14 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 XP-592 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| Sinvicomp SSF4569 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| Tenac™ 5010 | Asahi Kasei Chemicals Corporation | Acetal (POM) Homopolymer | Tenac™ |
| Vinnolit® EP 7555 | Vinnolit GmbH & Co. KG | PVC Homopolymer | Vinnolit® |
| OP - ABS ABS 4-8 SS | Oxford Polymers | ABS | OP - ABS |
