Order Products : sales@su-jiao.com
INEOS PP L70J-00
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BVIGHv_INEOS-PP-L70J-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| L70J-00 is a high melt flow rate, nucleated, lightly antistated impact copolymer polypropylene designed for high stiffness, thin-walled containers having a high length-to-thickness ratio (L/T). This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 28.4 | MPa | |
| Break | 16.6 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 4.9 | % | |
| Break | 38 | % | |
| Flexural Modulus - 1% Secant | 1550 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 33 | J/m | |
| 23°C | 65 | J/m | |
| Notched Izod Impact (Area) | ASTM D256 | ||
| -20°C | 3.20 | kJ/m² | |
| 23°C | 6.40 | kJ/m² | |
| Instrumented Impact, Ductility | ASTM D3763 | ||
| -20°C | Brittle | ||
| 23°C | Mixed |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 120 | °C | |
| 1.8 MPa, Unannealed | 57.8 | °C | |
| Vicat Softening Temperature | 151 | °C | ASTM D1525 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss (60°) | 66 | ASTM D2457 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTAMID® E E58-S4 | Evonik Industries AG | Nylon 12 | VESTAMID® E |
| Xuchuan A-7170/B-8260 | Xuchuan Chemical (Suzhou) Co., Ltd | TPU-Polyester | Xuchuan |
| Ferro PE JPE65HJ01BK | Ferro Corporation | LLDPE | Ferro PE |
| Geon™ FIT E 50 | Mexichem Specialty Resins, Inc. | PVC Homopolymer | Geon™ FIT |
| Hifax TRC 221X 1 | LyondellBasell Industries | PP Copolymer | Hifax |
