Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic PFA 6505TZ

Category:	PFA , Perfluoroalkoxy
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BV0H1o_3M-Dyneon-Fluoroplastic-PFA-6505TZ.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ Fluoroplastic PFA 6505TZ (a fully fluorinated copolymer of tetrafluoroethylene and perfluorovinylether) has exceptional temperature resistance, excellent electrical properties and excellent chemical inertness and weather resistance. It is used in molded valves, pumps, tanks, filters and pipes, in heat trace cables and in wire for appliances.

Features

Wide service temperature range

Excellent, almost universal resistance to solvents and chemicals

Extremely high weathering resistance and UV stability

Excellent electrical insulation properties

High limiting oxygen index: Does not support combustion

Smooth surfaces

Good non-stick characteristics

Good low-friction properties

Broad processing window

Improved mold release property

General Information
Features	Copolymer Good Chemical Resistance Good Electrical Properties Good UV Resistance Good Weather Resistance High Heat Resistance Low Friction Non-Stick Solvent Resistant
Uses	Filters Piping Pump Parts Tanks Valves/Valve Parts Wire & Cable Applications
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	2.15	g/cm³	ISO 12086
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)	5.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	60		ASTM D2240, ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break, 23°C)	30.0	MPa	ISO 527-1
Tensile Strain (Break, 23°C)	410	%	ISO 527-1
Flexural Modulus	550	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	310	°C	ISO 12086

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	> 95	%	ASTM D2863

Injection	Nominal Value	Unit
Processing (Melt) Temp	250 to 400	°C

Extrusion	Nominal Value	Unit
Melt Temperature	< 400	°C

Resin Grade	Manufacturer	Category	Trademark
Rilsan® BSR 30	Arkema	Nylon 11	Rilsan®
Sipolprene® 25185	SIPOL S.p.A	TPC-ET	Sipolprene®
ULTEM™ 1000FC resin	SABIC Innovative Plastics Europe	PEI	ULTEM™
Karina BLACK PVC COMPOUND -E 670D48/ 1-CY-IS-SD	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Karina IVORY PVC COMPOUND 853-35/ 1-DY-AC-EC	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina