Order Products : sales@su-jiao.com
Skyrol® SP91
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | SKC Inc. |
| Trademark: | Skyrol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BUfLl9_Skyrol-SP91.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Skyrol® SP91 is a one side chemically treated polyester film which provides enhanced adhesion to various kinds of metals, inks, and adhesives. When metallized on the chemically pretreated surface, SP91 shows significantly improved adhesion characteristics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.40 | g/cm³ | ASTM D1505 |
| Molding Shrinkage | Internal Method | ||
| Flow : 150°C, 30 min, 0.0120 mm | 1.7 | % | |
| Flow : 150°C, 30 min, 0.0230 mm | 1.6 | % | |
| Across Flow : 150°C, 30 min, 0.0120 mm | 0.80 | % | |
| Across Flow : 150°C, 30 min, 0.0230 mm | 1.2 | % | |
| Surface Tension - Treated | |||
| 12.0 µm | 55 | mN/m | ASTM D257 |
| 23.0 µm | 55 | mN/m | ASTM D2578 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | ASTM D1894 | ||
| vs. Itself - Dynamic 2 | 0.30 | ||
| vs. Itself - Dynamic 3 | 0.40 | ||
| vs. Itself - Static 4 | 0.40 | ||
| vs. Itself - Static 5 | 0.40 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 12 µm | 290 | MPa | |
| MD : Yield, 23 µm | 276 | MPa | |
| TD : Yield, 12 µm | 255 | MPa | |
| TD : Yield, 23 µm | 248 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 12 µm | 120 | % | |
| MD : Break, 23 µm | 130 | % | |
| TD : Break, 12 µm | 120 | % | |
| TD : Break, 23 µm | 120 | % |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Gloss | ASTM D523 | ||
| 12.0 µm | 164 | ||
| 23.0 µm | 163 | ||
| Transmittance | ASTM D1003 | ||
| 12.0 µm | 90.0 | % | |
| 23.0 µm | 90.0 | % | |
| Haze | ASTM D1003 | ||
| 12.0 µm | 3.0 | % | |
| 23.0 µm | 4.0 | % |
| Note Message | |
|---|---|
| 1 . | 23 µm |
| 2 . | 23 µm |
| 3 . | 12 µm |
| 4 . | 12 µm |
| 5 . | 23 µm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PC C 2020/140 | ALBIS PLASTIC GmbH | PC | ALTECH® PC |
| Amodel® A-4122 HR WH 117 | Solvay Specialty Polymers | PPA | Amodel® |
| China PPS hxGR62 | Sichuan Deyang Chemical Co., Ltd | PPS | China PPS |
| EPLAMID 66 GFT 10 NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 66 | EPLAMID 66 |
| Larpeek 10 G/30 | LATI S.p.A. | PEEK | Larpeek |
