Order Products : sales@su-jiao.com

ISPLEN® PB 182 G2M

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BU8igB_ISPLEN-PB-182-G2M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PB 182 G2M is a high fluidity heterophasic copolymer characterised by its excellent flow properties and good balance of mechanical properties, very high impact strength and high stiffness. It is particularly intended for injection moulding applications used in the manufacture of thin wall articles. Also, the material has a very low tendency to warp and it is used in goods where dimensional stability is important. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 182 G2M make it suitable for applications in which very high impact strength at high fluidity is required as well as good proccesability: Domestic and leisure furniture. Square boxes and round storage containers for consumer appliances. Trays and containers for cold storage of foodstuffs: ice creams, fresh vegetables, fruit processed... Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PB 182 G2M is a high fluidity heterophasic copolymer characterised by its excellent flow properties and good balance of mechanical properties, very high impact strength and high stiffness. It is particularly intended for injection moulding applications used in the manufacture of thin wall articles. Also, the material has a very low tendency to warp and it is used in goods where dimensional stability is important.

TYPICAL APPLICATIONS
The particular characteristics of ISPLEN® PB 182 G2M make it suitable for applications in which very high impact strength at high fluidity is required as well as good proccesability:

Domestic and leisure furniture.

Square boxes and round storage containers for consumer appliances.

Trays and containers for cold storage of foodstuffs: ice creams, fresh vegetables, fruit processed...

Industrial components: toys, sports, leisure, automotive, storage organizers, packaging...

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Features	Food Contact Acceptable Good Dimensional Stability High Flow High Stiffness Low Warpage Ultra High Impact Resistance
Uses	Automotive Applications Containers Food Containers Furniture Industrial Applications Packaging Sporting Goods Thin-walled Parts Toys
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	20	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	60		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1000	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	9.0	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	77.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
Viprene™ P45D-22U-NAT	Alliance Polymers & Services	TPV	Viprene™
WELLAMID Nylon 6600 HWUVCP	CP-Polymer-Technik GmbH & Co. KG	Nylon 66	WELLAMID Nylon
Unipren® Elastomers B3 PRTA010 70A EG06S1 UP341	Petropol Industry and Trade of Polymers LTDA	PP+EPDM	Unipren® Elastomers
HiFill FR® PC 1003 FR-NR UV	Techmer Engineered Solutions	PC	HiFill FR®
LOXIM 130 01 V0	LOXIM Industries Private Limited	PC	LOXIM