Order Products : sales@su-jiao.com

Sinpolene MBW1281

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Teknor Apex Asia Pacific PTE. LTD.
Trademark:	Sinpolene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BThsAg_Sinpolene-MBW1281.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Sinpolene MBW1281 is a polyolefin based pure white masterbatch designed specifically for use in tubular film blowing, cast film, blow moulding and extrusion of polyolefins. With its high pigment loading, Sinpolene MBW1281 offers high colouring value with excellent quality and performance. The blue undertone of this masterbatch is attributed by specially selected high performance, fine crystal size rutile titanium dioxide. Sinpolene MBW1281 is delivered as free flowing pellets for processing convenience. CHARACTERISTICS * Easy processing * Good dispersion * High opacifying power * Excellent whiteness * Low die deposit

Message

Sinpolene MBW1281 is a polyolefin based pure white masterbatch designed specifically for use in tubular film blowing, cast film, blow moulding and extrusion of polyolefins. With its high pigment loading, Sinpolene MBW1281 offers high colouring value with excellent quality and performance.

The blue undertone of this masterbatch is attributed by specially selected high performance, fine crystal size rutile titanium dioxide.

Sinpolene MBW1281 is delivered as free flowing pellets for processing convenience.

CHARACTERISTICS
* Easy processing
* Good dispersion
* High opacifying power
* Excellent whiteness
* Low die deposit

General Information
Filler / Reinforcement	Titanium Dioxide, 60% filler by weight
Uses	Films Masterbatch Sheet
Agency Ratings	FDA not rated
Appearance	White
Forms	Particle
Processing Method	Blow film Sheet extrusion molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.73	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	< 30	g/10 min	ASTM D1238
Moisture Content		%	ASTM D3030

Additional Information
Recommended dosage: 5 - 10%

Resin Grade	Manufacturer	Category	Trademark
MERICAN® 9180P	Huachang Polymer Co., Ltd.	Polyester Alloy	MERICAN®
WELLAMID Nylon 6600/50 GV 15 HWCP	CP-Polymer-Technik GmbH & Co. KG	Nylon 66	WELLAMID Nylon
Unipren® Elastomers A3 NTLA010 35A EB06S1 UP329	Petropol Industry and Trade of Polymers LTDA	TPE	Unipren® Elastomers
Cellophane™ K250AC29	Innovia Films Ltd.	Cellulose, Regenerated	Cellophane™
LNP™ THERMOCOMP™ OC006 compound	SABIC Innovative Plastics	PPS, Linear	LNP™ THERMOCOMP™