Order Products : sales@su-jiao.com
OnForce™ LFT LF0100-5001 NATURAL
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | PolyOne Corporation |
| Trademark: | OnForce™ LFT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BSu9Gs_OnForce-LFT-LF0100-5001-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyvan's long fiber thermoplastic polymers are used in situations where high hardness and good impact resistance are required, such as metal substitution or other structural applications. These products exhibit enhanced physical and mechanical properties compared to staple fiber products. Its advantages include improved impact strength, elasticity and material strength in different temperature ranges. In addition, compared with traditional high-filled short fiber products, long fiber thermoplastic polymers show improved properties in terms of creep and fatigue resistance, improved dimensional stability and unique surface finish. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.51 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | |||
| -- | 0.080 | % | ASTM D955 |
| -- | 0.10 - 0.20 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- | 10900 | MPa | ASTM D638 |
| -- 1 | 10700 | MPa | ISO 527-2 |
| Tensile Strength | |||
| Yield | 190 | MPa | ISO 527-2 |
| Fracture | 188 | MPa | ASTM D638 |
| Tensile Elongation | |||
| Fracture 2 | 2.0 - 3.0 | % | ISO 527-2 |
| Fracture | 2.5 | % | ASTM D638 |
| Flexural Modulus | |||
| -- | 9640 | MPa | ASTM D790 |
| -- | 8300 | MPa | ISO 178 |
| Flexural Stress | |||
| -- | 269 | MPa | ASTM D790 |
| Yield | 260 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 35 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 80 | kJ/m² | ISO 179 |
| Notched Izod Impact | 370 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 1.8 MPa, not annealed | 99.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 110 | °C | ISO 75-2/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 8.0 - 12 | hr | |
| Processing (Melt) Temp | 220 - 250 | °C | |
| Mold Temperature | 80.0 | °C |
| Injection instructions |
|---|
| LFT compounds can be processed using equipment similar to that used for short fiber products. The mechanical properties of finished parts dependgreatly on the length of the fibers in the molded part; therefore processing conditions must be set carefully in order to minimize fiber breakage. A "lowshear process" is advised, with low back pressure, low screw speed and low-to-medium injection speed.This grade must be dried in a dessicant dryer with a dew point set at -40°C. |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP EMI 2161 | RTP Company | PEI | RTP |
| NuSil MED-2955 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| Baytec® ME-230 (74A) | Covestro - PUR | PUR-Ether/MDI | Baytec® |
| Elastron® G G601.A80.N | Elastron USA, Inc. | SEBS | Elastron® G |
| Huafon HF-1380A | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
