Order Products : sales@su-jiao.com

Cazeden A PET

Category:	PET , Polyethylene Terephthalate
Manufacturer:	Hosaf
Trademark:	Cazeden
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BRvTiG_Cazeden-A-PET.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Cazeden A PET (previously referred to as T86) is a top quality thermoplastic material for injection stretch blow moulding and injection blow moulding of bottles for CSD, mineral water, edible oil, fruit juice, the pharmaceutical industry, dairy products, cosmetics and many more. Other applications include sheet extrusion, thermoforming of extruded sheets for food packaging, as well as industrial strap extrusion. The linear structure plus appropriate processing determine the superior physical and chemical properties of Cazeden A PET. The Cazeden A PET difference Outstanding properties create the excellence and uniqueness of Cazeden A PET as a packaging medium.

Characteristics:

Superb clarity and gloss

Toughness and impact resistance

Chemical resistance

Low gas permeation

Good processability

Good dimensional stability (low creep under load)

Relative light weight

Recyclable

General Information
Features	Food Contact Acceptable Good Chemical Resistance Good Dimensional Stability Good Impact Resistance Good Processability Good Toughness High Clarity High Gloss Low Gas Permeability Recyclable Material
Uses	Bottles Cosmetics Food Packaging Fruit Juice Bottles Packaging Pharmaceuticals Sheet
Agency Ratings	EU 2002/72/EC FDA 21 CFR 177.1630 UK SI 1998 No. 1376
Appearance	White
Forms	Pellets
Processing Method	Injection Blow Molding Injection Stretch Blow Molding Sheet Extrusion Thermoforming

Physical	Nominal Value	Unit
Density	1.40	g/cm³

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	52.0	MPa	ASTM D638
Flexural Modulus	2400	MPa	ASTM D790
Flexural Strength (Break)	75.0	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	74.0	°C	Internal Method
Peak Crystallization Temperature (DSC)	260	°C	Internal Method
Thermal Conductivity	0.21	W/m/K	ASTM C177

Injection	Nominal Value	Unit
Drying Temperature	160 to 180	°C
Drying Time	4.0 to 6.0	hr

Extrusion	Nominal Value	Unit
Drying Temperature	160 to 180	°C
Drying Time	4.0 to 6.0	hr

Resin Grade	Manufacturer	Category	Trademark
Makroblend® UT305	Covestro - Polycarbonates	PC+PET	Makroblend®
Quadraflex™ ALE-93A-B30	Biomerics, LLC	TPU-Polyether	Quadraflex™
ADDINYL B2I V25	ADDIPLAST	Nylon 6	ADDINYL
LUVOCOM® 80-7112/BK	LEHVOSS Group	Acetal (POM) Copolymer	LUVOCOM®
Vipel® K010-TBA-23	AOC, L.L.C.	Vinyl Ester	Vipel®