Telcar® TL-1950B-80NT RED 888 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Telcar TL-1950B-80NT RED 888 is a general purpose thermoplastic elastomer designed for a variety of consumer and industrial applications. Telcar TL-1950B-80NT RED 888 is a high hardness, high density, high flow grade suitable for injection molding.

General Information
Features	High specific gravity High density Good formability Good liquidity Good color stability Good adhesion Good chemical resistance Good toughness Fill High hardness Elastic
Uses	Handle Plug Washer Industrial application Home appliance components Building materials Connector General Shell Rubber substitution Knob
RoHS Compliance	RoHS compliance
Appearance	Red
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.29	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	15	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
Shaw A, 1 sec	88	ISO 868
Shaw A, 5 seconds	87	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Across Flow (100% Strain)	4.17	MPa	ISO 37
Tensile Stress - Across Flow (Break)	4.80	MPa	ISO 37
Tensile Elongation - Across Flow (Break)	180	%	ISO 37
Tear Strength - Across Flow	23	kN/m	ISO 34-1
Compression Set			ISO 815
23°C, 22 hr	22	%	ISO 815
70°C, 22 hr	95	%	ISO 815
90°C, 70 hr	100	%	ISO 815

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	212	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	171 - 193	°C
Middle Temperature	177 - 199	°C
Front Temperature	182 - 204	°C
Nozzle Temperature	188 - 210	°C
Processing (Melt) Temp	188 - 210	°C
Mold Temperature	25 - 66	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.345	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Telcar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BOoyg6_TelcarTL1950B80NTRED888.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Polymer-E EV302	Asia Polymer Corporation (APC)	EVA	Polymer-E
STABAMID® 25 JE 2	Solvay Polyamide & Intermediates	Nylon 66	STABAMID®
Zislloy® BFG30-BN00N2	Zig Sheng Industrial Co., Ltd.	Nylon 6	Zislloy®
CONTINUUM™ DGDA-2492 NT	The Dow Chemical Company	HDPE	CONTINUUM™
Fortron® 4184L4	Celanese Corporation	PPS	Fortron®