Order Products : sales@su-jiao.com
RTP 4005A TFE 15 SI 2
| Category: | PPA , Polyphthalamide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BL8nVm_RTP-4005A-TFE-15-SI-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.56 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.30 to 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 11700 | MPa | ASTM D638 |
| Tensile Strength | 141 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 1.8 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 9990 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 196 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 80 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 360 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 277 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 316 to 338 | °C | |
| Middle Temperature | 316 to 338 | °C | |
| Front Temperature | 316 to 338 | °C | |
| Mold Temperature | 66.0 to 163 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® B3 GFM 10/20 1 L black (4679) | AKRO-PLASTIC GmbH | Nylon 6+PP | AKROMID® |
| Ecovio® F2332 | BASF Corporation | Copolyester | Ecovio® |
| Keliren® CM366 | Hangzhou Keli Chemical Co., Ltd. | CPE | Keliren® |
| Plenco 06401 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
| Neoflex™ 8085 | Zylog Plastalloys Pvt. Ltd. | TPE | Neoflex™ |
