BiologiQ™ GS270

Category: TPS , Thermoplastic Starch
Manufacturer: BiologiQ
Trademark: BiologiQ™
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: BHo05S_BiologiQ-GS270.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
BiologiQ focuses on creating plastic materials from the starch of renewable resources. Our bioplastic resin pellets are made from sustainable agriculture and are 100% natural and safe.

BiologiQ GS270 is a plasticized thermoplastic starch (TPS) resin we call EcoStarch Resin (ESR). Supplied in pellet form.

Applications:
  • BiologiQ GS270 is a thermoplastic starch (TPS) polymer suitable for blending with petro-chemical or bioresins where biobased content is desired.
  • Can be used as a stand-alone polymer for certain low-temp injection molding applications
  • Highly compostable and biodegradable.
  • GS270 forms a crystalline structure product that has good strength and low plasticity.
  • When the GS270 absorbs moisture it exhibits plastic behavior and becomes flexible. When removed from a humid environment the material dries out and becomes crystalline again.
  • Used for final products requiring plasticity such as plastic dinnerware (plates, cups, and plastic utensils). Packaging structures such as thermoformed trays for various industries. Blended with PE to make thin film products such as shopping bags.
General Information
Features
  • Biodegradable
  • Compostable
  • Crystalline
  • Good Strength
  • Renewable Resource Content
Uses
  • Bags
  • Blending
  • Disposable Drinkware
  • Film
  • Packaging
  • Structural Parts
  • Support Trays
Forms
  • Pellets
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.40g/cm³ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)2.0g/10 minASTM D1238
Water Content < 1.0%ASTM D6980
ImpactNominal ValueUnitTest Method
Impact Resistance - Dart 3500gASTM D5628
MechanicalNominal ValueUnitTest Method
Tensile Modulus 1500MPaASTM D638
Tensile Strength ASTM D638
    Yield > 30.0MPa
    Break > 30.0MPa
Tensile Elongation (Break)< 10%ASTM D638
ThermalNominal ValueUnitTest Method
Glass Transition Temperature 81.0 to 100°CASTM D3418
Peak Melting Temperature 166 to 180°CASTM D3418
ExtrusionNominal ValueUnit
Drying Temperature 60.0°C
Drying Time 1.0 to 4.0hr
Suggested Max Moisture < 1.0%
Resin Grade Manufacturer Category Trademark
Novalloy-E E50 Daicel Polymer Ltd. ABS Novalloy-E
ASTAPET™ PC/PET MDA267-A Marplex Australia Pty. Ltd. PET ASTAPET™
DJSilicone NE-130 DONGJUE SILICONE (NANJING) CO., LTD Silicone DJSilicone
INLUBE PA66GF30TF13SI2 Infinity LTL Engineered Compounds Nylon 66 INLUBE
Sarlink® TPE ML-1640N NAT (PRELIMINARY DATA) Teknor Apex Company TPE Sarlink® TPE