Order Products : sales@su-jiao.com
Shinko-Lac® ASA TW25
| Category: | ASA , Acrylonitrile Styrene Acrylate |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BHmPSD_Shinko-Lac-ASA-TW25.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shinko-Lac® ASA TW25 is an Acrylonitrile Styrene Acrylate (ASA) material. It is available in North America for injection molding. Primary attribute of Shinko-Lac® ASA TW25: Heat Resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 3.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.55 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 47.1 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2260 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 71.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm, Injection Molded | 116 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm, Injection Molded | 103 | °C | |
| Vicat Softening Temperature | 117 | °C | ISO 306/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Siveras™ LX70G35 | Toray Resin Company | LCP | Siveras™ |
| Sindustris PC SG5010F | Sincerity Australia Pty Ltd. | PC+ABS | Sindustris PC |
| DOMAMID® AQL40 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| ECP 145 | TBA Electro Conductive Products Ltd. | Nylon 6 | ECP |
| Plenco 08122 (Compression) | Plastics Engineering Co. | Polyester, TS | Plenco |
