Plenco 02571 (Injection) Datasheet,Phenolic,Plastics Engineering Co.-SHANGHAI SUSHENG

Message
PLENCO 02571 is a general purpose, organic filled phenolic molding compound offering optimum cure characteristics while maintaining excellent mechanical and electrical properties. UL recognized under component file E40654. 02571 is available in black or brown color.

General Information
Filler / Reinforcement	Organic filler
Features	Fast curing Good electrical performance General
Uses	General
UL File Number	E40654
Appearance	Brown Black
Forms	Particles
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.41	g/cm³	ASTM D792
Apparent Density	0.64	g/cm³	ASTM D1895
Molding Shrinkage - Flow	0.89	%	ASTM D955
Water Absorption (24 hr)	0.28	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (E-Scale)	86		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	8740	MPa	ASTM D638
Tensile Strength	61.0	MPa	ASTM D638
Tensile Elongation (Break)	0.90	%	ASTM D638
Flexural Modulus	7650	MPa	ASTM D790
Flexural Strength	90.5	MPa	ASTM D790
Compressive Strength	191	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	18.9	J/m	ASTM D256
Notched Izod Impact	19	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	157	°C	ASTM D648
Continuous Use Temperature	200	°C	ASTM D794
CLTE - Flow	4.8E-5	cm/cm/°C	ASTM E831
Thermal Conductivity (100°C)	0.40	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	3.0E+12	ohms·cm	ASTM D257
Dielectric Strength ¹	13	kV/mm	ASTM D149
Dielectric Constant (1 MHz)	4.60		ASTM D150
Dissipation Factor (1 MHz)	0.046		ASTM D150
Arc Resistance	136	sec	ASTM D495
Comparative Tracking Index (CTI)	175	V	UL 746

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.50 mm)	HB		UL 94
Oxygen Index	25	%	ASTM D2863

Additional Information
The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.The value listed as Thermal Conductivity, ASTM C177 was tested according to the ASTM E1461 standard.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.28%Heat Resistance, ASTM D794: 200°CDrop Ball Impact, PLENCO Method: 107 J/m

Additional Information

The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.The value listed as Thermal Conductivity, ASTM C177 was tested according to the ASTM E1461 standard.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.28%Heat Resistance, ASTM D794: 200°CDrop Ball Impact, PLENCO Method: 107 J/m

Injection	Nominal Value	Unit
Suggested Shot Size	20 - 80	%
Rear Temperature	66.0 - 82.0	°C
Front Temperature	82.0 - 99.0	°C
Processing (Melt) Temp	104 - 115	°C
Mold Temperature	165 - 182	°C
Injection Pressure	6.20 - 11.0	MPa
Back Pressure	0.200	MPa
Screw Speed	< 60	rpm
Cushion	3.00	mm

Injection instructions
Injection Time: 3-8 sec

Note Message
1 .	Method A (short time)

Category:	Phenolic , Phenolic
Manufacturer:	Plastics Engineering Co.
Trademark:	Plenco
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BGzZ2b_Plenco-02571-Injection-.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
POLYPRO® 5014L MAT-4	YUHWA Korea Petrochemical Ind. Co., Ltd.	PP Copolymer	POLYPRO®
Premier LB01018 - BO	Premier Polymers, LLC.	LLDPE	Premier
BJB Polyurethane TC-886 A/B FR	BJB Enterprises, Inc.	PUR, Unspecified	BJB Polyurethane
ARCEL® LD (1.25 pcf)	NOVA Chemicals	PS+PE	ARCEL®
Elastron® V V101.D35.N	Elastron USA, Inc.	TPV	Elastron® V