Order Products : sales@su-jiao.com
ISPLEN® PM 252 AS
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BGL3dG_ISPLEN-PM-252-AS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene copolymer, 20% mineral fillers reinforced and good melt flow rate. ISPLEN® PM252 AS gives a high impact resistance even at low temperatures showing a good stiffness, and a low warpage and shrinkage behaviour. APPLICATIONS
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 25.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 5.0 | % | ISO 527-2 |
| Flexural Modulus | 2500 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180 | ||
| -20°C | 2.5 | kJ/m² | |
| 0°C | 3.0 | kJ/m² | |
| 23°C | 6.0 | kJ/m² | |
| Unnotched Izod Impact Strength | ISO 180 | ||
| -20°C | 18 | kJ/m² | |
| 0°C | 28 | kJ/m² | |
| 23°C | 55 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 73.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 65.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 150 | °C | ISO 306/A120 |
| -- | 75.0 | °C | ISO 306/B120 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Witcom POM-C EC-EP-HI | Witcom Engineering Plastics B.V. | Acetal (POM) Copolymer | Witcom POM-C |
| UNITIKA Nylon 66 A175G15 | UNITIKA Plastics Division | Nylon 66 | UNITIKA Nylon 66 |
| Geon™ Vinyl Rigid Molding M4810 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
| Vipel® F701-RRR-00 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| LEXAN™ 923 resin | SABIC Innovative Plastics | PC | LEXAN™ |
