Order Products : sales@su-jiao.com
SEQUEL® 1835
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | SEQUEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | BBpn6U_SEQUEL-1835.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sequel 1835 thermoplastic polyolefin material is designed for large automotive exterior applications requiring a high flexural modulus, good impact properties, excellent paintability and processability. This material has a high melt-flow rate combined with high flexural modulus. Typical Customer Applications: Exterior Applications |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 21 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 22.0 | MPa | ISO 527-2/50 |
| Flexural Modulus | 2800 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact 2(23°C) | 17.0 | J | ASTM D3763 |
| Note Message | |
|---|---|
| 1 . | 150x10x4mm specimen |
| 2 . | 2.20 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4805 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Alathon® M4661 | LyondellBasell Industries | HDPE | Alathon® |
| Exceed™ 2018HA | ExxonMobil Chemical | mPE | Exceed™ |
| HiFill FR® PA6 FR-N | Techmer Engineered Solutions | Nylon 6 | HiFill FR® |
| ICORENE® 1741 Black 9001 | ICO Polymers EMEA, A Division of A. Schulman | mHDPE | ICORENE® |
